An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on degauss camcorder, erasing hard drives, degaussing equipment, and degaussing services, see also: v-860 tape eraser scrub secure erase hard disk how to erase files from hard drive cds 2500a feed hopper degausser v-860 tape degausser mds5 degausser v-94 video tape degausser how can you erase data from a cd-r delete hard drive win 98 automatically erase file after reading dlt cleaning pc hard drive cleaning how can you erase data from a cd-r delete all data from hard disk make clean room hard disk mds5 eraser cds1500 disk eraser mds5 eraser how to erase my hard drive v-890 video tape eraser installing windows xp on a clean hard drive hd 2000 bulk degausser 1200 cd optical nsa approved erase hard drive with floppy disc v92 video tape degausser permanantly delete data erasing floppy disk degauss v-860 degausser how to delete all data from hard drive degauss camcorder dlt cleaning v-94 video tape eraser sv91m tape degausser wipe hard drive service when i reinstall windows 98 does it erase all my files hd-1 professional hard drive degausser sv91m diskette eraser hard drive file cleaning software hd-1 eraser v-94 gsa schedule

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on degauss camcorder, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: