An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on destroy hard drive data, erasing hard drives, degaussing equipment, and degaussing services, see also: delete hard drive compaq pressario v-860 eraser hd-1 degausser erase rw cd disks hard drive erase utility pf252 video tape eraser steps for cleaning data in a data warehouse erase rewritable cd utility v-860 video tape eraser pf252 video tape eraser cds1500 tape eraser sv91m hard drive eraser erase rewritable cd utility per-1100 disk degausser freeware erase internet files disk eraser free hd-1 professional hard drive degausser cds 2500a feed hopper tape eraser sv91m hard drive eraser how to erase a hard drive windows xe wipe hard drive clean software pf252 video tape eraser adt security services data center nashville tennessee erase your harddrive delete all data from hard disk installing windows xp on a clean hard drive mds-4 tape eraser when i reinstall windows 98 does it erase all my files cleaning up a hard drive v-880 eraser cleaning hard drive before selling computer data corp wipe drive dlt cleaning mds5 hard drive eraser tv degauser v92 video tape degausser western digital disk eraser how to erase my hard drive v-880 tape eraser manually cleaning hard drive

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on destroy hard drive data, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: