An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on erase rewritable cd utility, erasing hard drives, degaussing equipment, and degaussing services, see also: cleaning hard drive before selling computer degausing television screen how to erase the hard drive how to erase a hard drive windows xe cds1500 tape eraser v-890 video tape eraser v-870 video tape degausser mds5 video tape degausser sv91m diskette eraser clean your hard drive how to delete already deleted items off your hard drive hd-1 degausser erase media from 8mm tape pf252 tape eraser how to erase my hard drive g disk hard drive eraser hd-1 audio tape eraser v-870 video tape eraser v-94 video tape degausser visual basic recordset mshflexgrid erases row data per-1100 drive eraser v92 degausser windows xp delete unnecessary files second hard drive manually cleaning hard drive disk eraser free v-94 tape eraser td1b tape degausser v92 hard drive eraser delete all data from hard disk erasing floppy disk degauss whole-house media air cleaners tv degauser v-880 eraser pc hard drive cleaning disk eraser free sv91m diskette degausser erase free disk space mac sv91m hard drive eraser how to erase the hard drive visual basic recordset mshflexgrid erases row data

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on erase rewritable cd utility, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: