An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on hard drive degauser, erasing hard drives, degaussing equipment, and degaussing services, see also: erase rw cd disks hd-1 video tape degausser per-1100 drive degausser v-890 video tape eraser v-94 tape eraser visual basic mshflexgrid erases row data recordset 1200 cd eraser how to partition and erase a harddrive erase data from hard drives cleaning up a hard drive steps for cleaning data in a data warehouse computer degausing hd-1 professional hard drive degausser data security acts and laws donate erase hard drive hard drive degauser clean your hard drive pf252 video tape eraser wipe hard drive clean software how can you erase data from a cd-r per-4516 tape degausser hd 2000 bulk degausser erase files stored on my computer erase rewritable cd utility plasmom optical media cleaners surface how do i wipe a hard drive permanantly delete data forums sv91m hard drive eraser hd-1 eraser data corp wipe drive erase harddrive software mds5 hard drive degausser sv91m hard drive degausser cleaning up a hard drive delete hard drive win 98 sv91m diskette degausser erase files stored on my computer how to delete already deleted items off your hard drive erase and freespace and harddrive g disk hard drive eraser

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on hard drive degauser, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: