An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on hard drive erase utility, erasing hard drives, degaussing equipment, and degaussing services, see also: per-4516 tape eraser hd-1 audio tape eraser cds 2500a feed hopper tape degausser data security holdings erase rw cd disks hard drive degauser erase and freespace and harddrive healthy climate air cleaner media unix admin and wipe disk and erase all cds 2500a feed hopper tape eraser how to partition and erase a harddrive erase hard drive with floppy disc erasing floppy disk degauss how to delete all data from hard drive sv91m tape degausser wipe hard drive service pf252 video tape eraser mds5 degausser pf252 video tape degausser windows xp delete unnecessary files second hard drive mac blank cd erase strip wipe hard drive service 1200 cd optical nsa approved delete hard drive compaq pressario v-94 video tape degausser sv91m diskette degausser erase your harddrive v-94 gsa schedule tv degauss wand tv degauser program clear worksheet data delete 1200 cd optical nsa approved what files are safe to delete from my hard drive destroy hard drive data donate erase hard drive manually cleaning hard drive v92 degausser cds1500 disk eraser hd-1 eraser v-860 eraser

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on hard drive erase utility, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: