An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on how do i wipe a hard drive, erasing hard drives, degaussing equipment, and degaussing services, see also: sv91m eraser mds5 degausser erase and freespace and harddrive how to delete my hard drive how to delete my hard drive how can you erase data from a cd-r v-94 gsa schedule installing windows xp on a clean hard drive how to delete win 98sec edition from a hard drive total erase hard drive v92 hard drive eraser hd-1 audio tape eraser how to erase files on hard drive degauss camcorder what will happen if i completely erase my hard drive cleaning hard drive before selling computer erase harddrive completely v-890 tape eraser destroy hard drive data sv91m eraser hd-1 professional hard drive degausser erase harddrive software used computers how to erase my hard drive hd-1 audio tape eraser per-1100 disk degausser visual basic recordset mshflexgrid erases row data mds5 hard drive degausser mds-4 video tape eraser cds1500 disk eraser clean hard drive for free cannot delete data folders from outlook 2002 v92 video tape eraser degausing television screen v-860 tape eraser clean up hard drive file v92 degausser erase harddrive completely mds-4 video tape degausser hd-1 video tape eraser

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on how do i wipe a hard drive, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: