An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on make clean room hard disk, erasing hard drives, degaussing equipment, and degaussing services, see also: steps for cleaning data in a data warehouse erase harddrive software visual basic recordset mshflexgrid erases row data cds 2500a feed hopper tape degausser degaus zenith tv pf252 video tape eraser program clear worksheet data delete v-860 degausser erase your harddrive mds-4 audio tape degausser erase hard drive computer erase harddrive software per-1100 diskette degausser erase free disk space mac how to delete all data from hard drive sv91m diskette eraser used computers degausing television screen hard drive erase utility per-4516 tape eraser per-1100 diskette eraser hard drive clean up reviews degaus zenith tv freeware delete all data windows me v-860 video tape degausser erase free disk space mac 4000 fs video tape eraser tv degauss wand per-4516 tape eraser make clean room hard disk hd-1 professional hard drive eraser sv91m disk eraser ari degaus manually cleaning hard drive mds5 video tape eraser v-880 tape degausser cds1500 tape eraser mssql 2000 cleaning data repeating field separators cleaning hard drive before selling computer 1200 cd eraser

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on make clean room hard disk, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: