An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on manually cleaning hard drive, erasing hard drives, degaussing equipment, and degaussing services, see also: cds1500 diskette eraser cds 2500a feed hopper tape eraser mds-4 tape eraser cds1500 diskette eraser visual basic recordset mshflexgrid erases row data hard drive file cleaning software hd-1 audio tape degausser unix admin and wipe disk and erase all erase rewritable cd utility erase harddrive software hd-1 audio tape degausser delete hard drive compaq pressario total erase hard drive c64 disk erase plasmom optical media cleaners surface how to delete a hard drive erase rewritable cd utility v-860 tape degausser visual basic mshflexgrid erases row data recordset mssql 2000 cleaning data repeating field separators sv91m tape eraser erase harddrive software sv91m tape degausser data security acts and laws hd-1 audio tape degausser delete data tracker tv degauser honeywell f150 media air cleaner when i reinstall windows 98 does it erase all my files downloads file erase how to erase files from hard drive pc hard drive cleaning wipe hard drive clean software hard drive dod wipe mssql 2000 cleaning data repeating field separators per-1100 hard drive eraser how to erase files on hard drive v-860 video tape eraser cds 2500a feed hopper tape degausser data security holdings

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on manually cleaning hard drive, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: