An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on media cleaner 6, erasing hard drives, degaussing equipment, and degaussing services, see also: what files are safe to delete from my hard drive cleaning hard drive before selling computer visual basic msflexgrid erases row data recordset per-1100 drive degausser how to partition and erase a harddrive v92 degausser visual basic msflexgrid erases row data recordset data security holdings how magnets erase tape memory scrub secure erase hard disk how to delete already deleted items off your hard drive healthy climate air cleaner media wipe hard drive clean software visual basic mshflexgrid erases row data recordset wipe hard drive clean software wipe it: the hard drive eraser pf252 video tape degausser v-94 video tape eraser erase data cd and microwaves v-860 tape degausser g disk hard drive eraser v-94 gsa schedule mac blank cd erase strip v-860 eraser windows xp delete unnecessary files second hard drive degausing television screen sv91m hard drive degausser delete hard drive win 98 mds5 video tape degausser pf252 video tape eraser hd-1 professional hard drive degausser hd-1 professional hard drive degausser how to erase files on hard drive hd-1 video tape degausser hard drive degauser how to erase a hard drive windows xe erase rw cd disks scrub secure erase hard disk media cleaner 6 hard drive file cleaning software

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on media cleaner 6, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: