An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on scrub secure erase hard disk, erasing hard drives, degaussing equipment, and degaussing services, see also: honeywell f150 media air cleaner destroy hard drive data cds 2500a feed hopper tape eraser erase rewritable cd utility per-1100 disk degausser v-860 video tape eraser erase and freespace and harddrive dlt cleaning v92 video tape degausser cleaning data in a data warehouse erase hard drive with floppy disc magnetic degausers pc hard drive cleaning sv91m disk eraser v-94 gsa schedule plasmom optical media cleaners surface v-860 degausser clean gb of memory from hard drive sql server restore ldf file from erase remove data from harddrive hd-1 professional hard drive eraser healthy climate air cleaner media how to delete a hard drive v-860 tape degausser sv91m tape degausser v-860 video tape eraser program clear worksheet data delete clean up hard drive file v-890 video tape degausser cds1500 tape eraser hard drive dod wipe erase harddrive completely clean hard drive free trial per-1100 hard drive eraser visual basic mshflexgrid erases row data recordset sv91m disk eraser hd-1 degausser erase page files v-860 eraser delete data tracker

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on scrub secure erase hard disk, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: