An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on tv degauss wand, erasing hard drives, degaussing equipment, and degaussing services, see also: erase ntfs hard drive free destroy hard drive data wipe it: the hard drive eraser erase harddrive completely erase files stored on my computer total erase hard drive whole-house media air cleaners program clear worksheet data delete degausing television screen visual basic msflexgrid erases row data recordset plasmom optical media cleaners surface delete hard drive win 98 per-1100 disk degausser erase data cd and microwaves erase media from 8mm tape cannot delete lexmark network port and data invalid hd-1 eraser freeware erase internet files windows xp delete unnecessary files second hard drive hd-1 video tape degausser delete hard drive compaq pressario cds 2500a feed hopper tape degausser erase reload dell hard drives 1200 cd eraser honeywell f150 media air cleaner hd-1 audio tape eraser erase ntfs hard drive free hard drive dod wipe 1200 cd eraser how to erase a hard drive windows xe hard drive erase utility erase ntfs hard drive free 1200 cd eraser per-4516 tape eraser sv91m diskette eraser erase media from 8mm tape mds-4 video tape degausser sv91m degausser hard disk data wipe tools dod standard erase hard drive utility

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on tv degauss wand, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: