An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on v-860 degausser, erasing hard drives, degaussing equipment, and degaussing services, see also: sv91m hard drive degausser computer degausing v-860 gsa schedule wipe hard drive service cleaning data in a data warehouse data corp wipe drive mds5 video tape eraser freeware erase internet files per-1100 disk eraser erase files stored on my computer v-94 gsa schedule per-1100 disk eraser hard disk data wipe tools dod standard honeywell f150 media air cleaner whole-house media air cleaners visual basic msflexgrid erases row data recordset how magnets erase tape memory sv91m disk degausser pf252 video tape degausser per-1100 drive eraser mds5 degausser v-880 degausser sv91m diskette eraser delete hard drive win 98 v-880 tape degausser cleaning hard drive before selling computer permanantly delete data forums data security acts and laws erase hard drive computer sv91m diskette eraser erase media from 8mm tape v-880 tape degausser hd-1 video tape degausser v-94 video tape eraser v-860 gsa schedule 4000 fs video tape eraser how to delete a hard drive pc hard drive cleaning how to erase files on hard drive sv91m hard drive degausser

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on v-860 degausser, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: