An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on v-880 degausser, erasing hard drives, degaussing equipment, and degaussing services, see also: clean your hard drive visual basic recordset mshflexgrid erases row data media cleaner 6 hd-1 professional hard drive degausser how to erase files from hard drive erase rewritable cd utility v92 degausser erase rewritable cd utility c64 disk erase pf252 tape degausser erase ntfs hard drive free clean gb of memory from hard drive hd-1 professional hard drive eraser v-870 video tape eraser data security acts and laws per-1100 diskette degausser mds-4 audio tape eraser sv91m hard drive eraser cleaning hard drive before selling computer software to erase hard disk per-1100 drive degausser hard disk data wipe tools dod standard remove data from harddrive 1200 cd optical nsa approved western digital disk eraser mds-4 audio tape eraser hd-1 video tape eraser v-870 video tape degausser v-860 video tape eraser sv91m eraser how to erase files from hard drive sv91m diskette eraser freeware erase internet files how to erase files from hard drive delete hard drive win 98 cleaning up a hard drive v92 video tape eraser 1200 cd eraser honeywell f150 media air cleaner v-870 video tape eraser

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on v-880 degausser, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: