An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on v-94 video tape eraser, erasing hard drives, degaussing equipment, and degaussing services, see also: how to erase my hard drive how to delete already deleted items off your hard drive sv91m tape eraser erase reload dell hard drives per-4516 degausser pf252 tape degausser degauss camcorder per-1100 diskette eraser program clear worksheet data delete permanantly delete data clean gb of memory from hard drive erase data from hard drives tv degauser v-860 eraser hd-1 professional hard drive degausser erase free disk space mac pf252 video tape degausser hd 2000 bulk degausser sv91m tape degausser cannot delete lexmark network port and data invalid how to erase files on hard drive v-880 eraser pf252 tape eraser clean hard drive for free sv91m hard drive eraser per-4516 eraser donate erase hard drive honeywell f150 media air cleaner v-860 eraser mds-4 tape degausser what will happen if i completely erase my hard drive td1b tape degausser how to erase files on hard drive v-94 video tape eraser tv degauser permanantly delete data forums v-94 tape degausser v-890 tape eraser degauss camcorder how do i wipe a hard drive

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on v-94 video tape eraser, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: