An alternating current (AC) bulk eraser (degausser) is used for complete erasure of data and other signals on magnetic media. Degaussing is a process where magnetic media is exposed to a powerful, alternating magnetic field. Degaussing removes any previously written data, leaving the media in a magnetically randomized (blank) state.

The degausser must subject the media to an alternating magnetic field of sufficient intensity to saturate the media and then by slowly withdrawing or reducing the field, the magnetic media is left in a magnetically neutral state.

To erase recorded data, it is necessary for the strength of the degaussing field to be greater in value than the coercivity of the magnetic media. Simply stated, coercivity is the magnetic field strength, rated in oersteds (Oe), required to change the magnetic orientation of the magnetic material. Check with knowledgeable dealers or degausser manufacturers to identify degausser models that meet your requirements.

Data is typically not lost until its level has been decreased 65% to 75% (or more) below its original saturation recording signal level, dependent upon the drive system.

 

For more information on western digital disk eraser, erasing hard drives, degaussing equipment, and degaussing services, see also: mds-4 audio tape eraser mds-4 audio tape degausser v-860 tape eraser erase hard drive mircrosoft erase hard drive utility 4000 fs video tape eraser erase free disk space mac mssql 2000 cleaning data repeating field separators freeware erase internet files how to delete already deleted items off your hard drive clean hard drive free trial erase bad credit file erase data cd and microwaves mds5 video tape degausser western digital disk eraser sv91m disk degausser hard disk data wipe tools dod standard make clean room hard disk 1200 cd optical nsa approved program clear worksheet data delete erase harddrive completely per-4516 eraser erase page files media cleaner 6 data corp wipe drive mds5 hard drive eraser v-880 eraser mds5 hard drive eraser permanantly delete data forums per-4516 degausser v-890 video tape degausser total erase hard drive healthy climate air cleaner media sv91m disk degausser erase files stored on my computer v-880 tape eraser erase harddrive software automatically erase file after reading v92 video tape degausser scrub secure erase hard disk

A complete erasure level, for most users, is considered to be 60 dB below the original signal level – this of course depends on user requirements. A 60 dB signal decrease equates to reducing the signal to one tenth of one percent of its original value.

Magnetic media products that have factory prerecorded magnetic servo patterns should not be degaussed. Degaussing would erase the factory written magnetic servo signals and leave the media unusable. For all other magnetic media (without magnetic servo signals), after proper degaussing, the quality of subsequent data recording should be unchanged or even improved.

It is very important to understand and follow the degausser’s operating instructions. This is especially important for manual units where the operator controls the media’s movement through the degaussing field. For higher coercivity media, four passes are often recommended – two passes, with a 90 degree rotation for the second pass, and then repeat the process with the media turned upside-down. Of course, these and other important operating considerations will vary with the type, power and construction of the individual degausser models.

For more information on western digital disk eraser, degaussers, erasing hard drives, cleaning hard drives, degaussing, and erasing harddrives, see also: